NHTSA recall 91V148000
Wheels · Winnebago Industries, Inc.
Details
What's wrong: Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.
Why it matters: Vehicle stability may be impaired under certain roador operating conditions which may cause loss of vehicle control.
The fix: Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.
Affected vehicles on MotorDeets
- 1990 Winnebago CW822FT
- 1990 Winnebago CW822FW
- 1990 Winnebago CW825FT
- 1990 Winnebago CW825FW
- Winnebago CW822FT
- Winnebago CW822FW
- Winnebago CW825FT
- Winnebago CW825FW
All model years NHTSA lists
1990 Winnebago Cw822Ft, 1990 Winnebago Cw822Fw, 1990 Winnebago Cw825Ft, 1990 Winnebago Cw825Fw.
Recalls can cover only some VINs. Check yours on NHTSA's official recall page for 91V148000.
Source: NHTSA recall records. Summary shortened; the official notice has the full text.