Jayco Firenza problems & recalls

Problem: Jayco, inc. (jayco) is recalling various 2002-2016 recreational vehicles equipped with kidde plastic-handle or push button 'pindicator' fire extinguishers. a list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/rmisc-17v746-9524.pdf. these extinguishers may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. for a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/201

Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Fix: Jayco will notify owners, instructing them to contact kidde for a replacement fire extinguisher, free of charge. the recall began on january 15, 2018. owners may contact jayco customer service at 1-800-283-8267, or kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "product safety recall" for more information.

Problem: Certain motor homes equipped with a two-door refrigerator, manufactured by the dometic corporation, may have a defect in the boiler tube. pressurized coolant solution could be released into an area where an ignition source (gas flame) is present.

Risk: Release of coolant under certain conditions could ignite and result in a fire.

Fix: Jayco will be working with dometic in order to repair these refrigerators (please see 06e076). dometic will repair these refrigerators by installing a secondary burn housing, a thermal fuse, and a melt fuse free of charge. dometic has retained stericycle inc. to manage this campaign. stericycle will assist you in locating dealerships or service centers and will provide assistance with scheduli

Problem: Certain motor homes built on workhorse chassis and equipped with actia corporate instrument clusters fail to comply with the requirements of federal motor vehicle safety standard (fmvss)nos. 101 "controls and displays" and no. 105 "hydraulic and electric brake systems." the incorrect software programmed into the instrument panel cluster such that certain driver warnings required by fmvss 101 and 105 are not displayed. as a result of this incorrect software, the instrument panel cluster may fail to illuminate warning lamps indicating brake system failure codes.

Risk: Drivers would not be warned of brake system failures.

Fix: Jayco is working with workhorse to notify owners and have the repair performed on their vehicles. owners should contact workhorse at 1-877-246-7731 or jayco at 1-800-283-8267.

Problem: On certain motorhomes, exposure to heat in the engine compartment could decrease the life of the cable constraint components. this could allow the electrical cables to come in contact with, or be damaged by, exhaust components.

Risk: This could cause deterioration of cable insulation or shorting of electrical cables resulting in a fire.

Fix: Dealers will install metal cable ties and heat shields. owner notification began april 1, 2004. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact jayco at 1-574-825-0608.

Problem: On certain motor homes, there is no option to sanitize the fresh water tanks and to prevent back-flow from the water pump.

Risk: Contamination of the water hose could occur.

Fix: Dealers will add a hose assembly with a valve to route the sanitation solution to the fresh tank. also a back flow preventor will be added to the fresh water intake to prevent the water from the fresh tank from contacting the fresh hose. owner notification began september 17, 2003. owners should contact jayco at 1-574-825-0608.

Problem: Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "hydraulic and electric brake systems." the brake system warning indicator may not function as required by standard.

Risk: In some of the affected vehicles, the brake system warning indicator will not illuminate when the ignition is in the start position or for a low brake fluid condition, if the body builder relied solely upon ford's ivm compliance statement for the brake system warning indicator.

Fix: Dealers will repair the brake warning lamp circuit. owner notification began march 30, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact jayco at 1-574-825-0608.