1999 Chrysler Cirrus: Recalls, Problems & MPG
Here are the deets on the 1999 Chrysler Cirrus: 3 recalls, 62 owner complaints and up to 20 mpg combined.
Recalls
3 vehicle recalls from the manufacturer, plus 4 equipment/tire recalls that can apply. Repairs are free. Check your VIN to see if one is still open on your car.
Brakes (hydraulic) Vehicle recall #99V244000 · 1999 · 366,508 vehicles
What's wrong: The right rear brake tube can contact the exhaust system clamp and wear a hole in it.
Why it matters: Daimlerchrysler recall no. 843. If this happens, the tube could leak, reducing the effectiveness of one-half of the diagonally split braking system, and resulting in longer stopping distances.
The fix: Dealers will inspect the brake tubes for visible evidence of contact with the exhaust system clamp. If the tube shows evidence of contact, it will be replaced. If no evidence of contact exists, the tube will be fastened with a clip.
Transmission & drivetrain Vehicle recall #04V021000 · 2004 · 2,315,768 vehicles
What's wrong: On certain passenger vehicles, the floor shifter ignition-park interlock May fail and allow the shifter to be moved out of the park position with the key removed. An inoperative interlock May also allow the key to be removed when the shifter has not been placed in the park position.
Why it matters: Either circumstance May result in the vehicle rolling away without warning.
The fix: Dealers will install a new load-limiting push rod into the floor shifter lever of the affected vehicles. Owner notification began on June 14, 2004. Owners should contact daimlerchrysler at 1-800-853-1403.
Steering Vehicle recall #06V001000 · 2006 · 216,299 vehicles
What's wrong: On certain passenger vehicles equipped with 2.4 liter engines, the high pressure power steering hose May prematurely heat age and develop a leak.
Why it matters: Power steering fluid leakage in the presence of an ignition source May result in an underhood fire.
The fix: Dealers will replace the high pressure power steering hose free of charge. The the recall began on April 10, 2006.
4 aftermarket equipment / tire recalls replacement parts sold to fit this car, not the car itself
Fuel system Equipment recall #06E088000 · 2006 · 39,243 vehicles
What's wrong: Certain tigas fuel pump modules manufactured between June 1 and September 24, 2006, sold under various brand names and p/nos. These fuel pump modules are sold as aftermarket for use in certain daimlerchrysler vehicles listed above. Silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper valve restricting the flow of fuel to the fuel pump module.
Why it matters: Fuel restriction could result in loss of power and/or engine stall, possibly resulting in a vehicle crash.
The fix: Ti automotive will notify owners and replace the defective fuel pump modules free of charge. The recall began on October 6, 2006.
Equipment Equipment recall #09E043000 · 2009 · 30,351 vehicles
What's wrong: These filters May develop a leak in the hose assembly and/or connectors due to improperly adhered line connectors.
Why it matters: This condition May result in a vehicle fire.
The fix: The affinia group will notify owners and the filters will be replaced free of charge. The safety recall began on August 1, 2009.
Suspension Equipment recall #09E056000 · 2009 · 5,787 vehicles
What's wrong: The socket May have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, d10945, d10946, g10945, and g10946. The affected control arms, d10945 and d10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909,…
Why it matters: Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
The fix: Qualis automotive will replace the ball joints free of charge. The safety recall began on November 9, 2009.
Suspension Equipment recall #10E059000 · 2010 · 22,689 vehicles
What's wrong: The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.
Why it matters: If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.
The fix: Federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on January 28, 2011.
Most-reported problems
Owner complaints filed with NHTSA, by component. One complaint can list several components. 2 mention a fire, 5 injuries and 0 deaths were reported.
What owners describe
- Transmission & drivetrain (13): the most common themes are hard / delayed shifting (6), warning light on (4).
- Brakes (hydraulic) (8): the most common themes are brake failure / soft pedal (3), noise or vibration (2).
- Engine & cooling (8): the most common themes are stalls / loses power (3), warning light on (2).
- Fuel system (8): the most common themes are stalls / loses power (3), leaks (2).
The 1999 Chrysler Cirrus has 62 owner complaints, ranking #6 of 8 Cirrus model years for complaints (well below the 104 average). Complaints peaked in 2001 (13 filed that year). The typical problem showed up when the car was about 3 years old, at a median of 69,000 miles. Neighboring years: 1998 (69 complaints, 3 recalls), 2000 (99 complaints, 5 recalls).
Engines & fuel economy (EPA)
| Engine | Transmission | Drive | City | Hwy | Comb. | Fuel |
|---|---|---|---|---|---|---|
| 2.5 L 6-cyl | Automatic 4-spd | Front-Wheel Drive | 17 | 25 | 20 | Regular |
Want the full repair deets? Get the factory manual.
Recall and complaint data tells you what goes wrong. A service manual tells you how to fix it: torque specs, wiring diagrams, fluid capacities and step-by-step procedures for the 1999 Chrysler Cirrus.
Closest thing to the factory manual for most years. Pay once, keep it.
Most $25–$78, one-timePro-shop repair procedures, wiring diagrams and TSBs for your exact car.
From $19.99/mo · $39.99/yrOEM procedures, specs and recall/TSB info, the same source many shops use.
From $19.99/mo · $59.99/yrStep-by-step photos written from a real teardown. Great for first-timers.
Books ~$30–$40 · AllAccess $34.99/moHeads up: we may earn a commission if you buy through these links, at no extra cost to you. Prices checked 2026-10 and can change. We never host or link to pirated manuals. Disclosure
FAQ
Does the 1999 Chrysler Cirrus have any recalls?
Yes. NHTSA lists 3 vehicle recalls for the 1999 Chrysler Cirrus, plus 4 equipment or tire recalls that can apply. Recall repairs are free at any dealer, no matter how old the car is. Check your VIN at nhtsa.gov/recalls.
What are the most common 1999 Chrysler Cirrus problems?
Owners have filed 62 complaints with NHTSA. The most-reported areas are transmission & drivetrain (13), brakes (hydraulic) (8), engine & cooling (8).
What gas mileage does the 1999 Chrysler Cirrus get?
EPA ratings run up to 20 mpg combined (2.5 L, Automatic 4-spd), across 1 engine and transmission combos.
Where can I get a 1999 Chrysler Cirrus repair manual?
eManualOnline sells downloadable manuals, Mitchell 1 DIY and ALLDATAdiy sell online access to factory repair data, and Haynes sells printed guides and online access. Pick a download if you want to keep it, or a subscription for wiring diagrams and TSBs.