Ducati Diavel problems & recalls

Problem: Ducati north america (ducati) is recalling certain 2023 diavel v4 motorcycles. the right and/or left side passenger foot pegs may break while mounting or riding the motorcycle.

Risk: A broken foot peg can cause the passenger to suddenly lose their foot support, increasing the risk of crash or injury.

Fix: Dealers will inspect and if necessary, replace the right and/or left side passenger foot pegs, free of charge. owners may contact ducati customer service at 1-888-391-5446. ducati's number for this recall is srv-rcl-23-002.

Problem: Ducati is recalling certain model year 2012-2013 diavel motorcycles manufactured from may 25, 2012, through june 28, 2012. the side stand may bend or break.

Risk: The side stand could bend or break in the pivot area, allowing the motorcycle to fall over, increasing the risk of personal injury to the operator or others near the motorcycle. even without falling over, a bent sidestand may interfere with the proper operation of the sidestand safety switch, preventing the bike from starting or causing the bike to stall without warning.

Fix: Ducati will notify owners, and authorized dealers will replace the side stand, free of charge. the safety recall began on august 13, 2012. owners may contact ducati at 1-800-231-6696 or through their website at www.ducati.com.

Problem: Ducati is recalling certain model year 2011 diavel motorcycles manufactured from may 18, 2010, through june 13, 2011. the side stand was manufactured with insufficient material in the pivot area.

Risk: This could result in the possible bending and breakage of the side stand in the pivot area allowing the motorcycle to fall over possibly resulting in injury to the rider or others near the motorcycle.

Fix: Ducati will notify owners, and authorized dealers will replace the side stand and pivot bolt free of charge. the safety recall began on september 20, 2011. owners may contact ducati at 1-800-231-6696 or go to their website at www.ducati.com.

Problem: Ducati is recalling certain model year 2011 diavel motorcycles manufactured from september 23, 2010, through may 12, 2011. the brass inserts installed in the chain guard may deform over time, resulting in the possible loosening of the license plate holder retaining screws on the rear swing-arm. this situation could cause the license plate holder to become loose during normal operation of the motorcycle.

Risk: Loosening of the license plate holder could interfere with the motorcycle's rear wheel rotation and thereby increase the risk of a crash.

Fix: Ducati dealers will replace the chain guard with an updated version, manufactured with steel inserts. this service will be performed free of charge. the safety recall began on july 27, 2011. owners may contact ducati at 1-800-231-6696.

Problem: Ducati is recalling certain model year 2010-2011 multistrada 1200, and model year 2011, diavel motorcycles. the electronic steering lock may fail to disengage during the motorcycle "key-on" process. this has been linked directly to a certain revision of the hands free device software. it could result in a situation where the motorcycle's engine might start while the steering lock is still engaged. a rider could start the motorcycle and attempt to ride away while the steering is still locked.

Risk: The rider could experience the inability to steer increasing the risk of low speed tip-over or collision, thus increasing the potential for injury to the rider.

Fix: The dealer will update the software of the hands free control unit free of charge. the recall is expected to begin during may 2011. owners may contact ducati at 1-800-231-6696.