2003 Damon Intruder problems & recalls

Problem: Certain motor home chassis fail to comply with the requirements of federal motor vehicle safety standard no. 105, "hydraulic and electric brake systems." the brake system warning indicator may not function as required by standard.

Risk: In some of the affected vehicles, the brake system warning indicator will not illuminate when the ignition is in the start position or for a low brake fluid condition, if the body builder relied solely upon ford's ivm compliance statement for the brake system warning indicator.

Fix: Dealers will repair the brake warning lamp circuit. owner notification is began may 12, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact damon at 1-219-272-9212.

Problem: During the winterization process on certain motor homes from november 5, 2002 through january 6, 2003, the rv antifreeze used may have been contaminated with engine antifreeze.

Risk: This poses a potential toxic hazard if ingested at high levels.

Fix: Dealers will ensure that the water system has been properly flushed. owner notification began april 7, 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact damon at 1-574-264-2900.

Problem: Certain motor homes built on workhorse chassis and equipped with actia corporate instrument clusters fail to comply with the requirements of federal motor vehicle safety standard no. 101, "controls and displays" and no. 105, "hydraulic and electric brake systems." if the brake fail input falls below a voltage of 1.5v, the brake failure lamp and alarm will be activated. also activation of the abs telltale when the abs is not properly functioning does not always occur.

Risk: At night the instrument cluster lights may fail and the driver may not be able to see the instrument panel gauges and the brake warning light indicator which could increasing the risk of a crash.

Fix: Damon is working with workhorse to contact the owners and remedy this campaign . workhorse will reprogram the instrument panel cluster free of charge. owners may contact workhorse at 1-877-246-7731 or damon at 1-800-860-3812.

Problem: Certain motor homes fail to comply with the requirements of federal motor vehicle safety standard no. 108, "lamps reflective devices, and associated equipment." these motor homes were built without the red rear reflex reflectors and some motor homes were built without the side rear red reflex reflectors.

Risk: During night driving conditions or while the motor home is parked, the rear and side marker lights will not provide any reflex reflection to mark the vehicle's location in the dark increasing the risk of a crash.

Fix: Damon will provide the owners with a kit containing the missing reflectors and instructions for applying them to their vehicle. owners may choose to have their dealers do the repair free of charge. the recall began on july 9, 2007. owners may contact damon at 1-800-860-3812.

Problem: Certain travel trailers and motor homes equipped with a two-door refrigerator, manufactured by the dometic corporation, may have a defect in the boiler tube. pressurized coolant solution could be released into an area where an ignition source (gas flame) is present.

Risk: Release of coolant under certain conditions could ignite and result in a fire.

Fix: Damon will be working with dometic in order to repair these refrigerators (please see 06e076). dometic will repair these refrigerators by installing a secondary burn housing, a thermal fuse, and a melt fuse free of charge. dometic has retained stericycle inc. to manage this campaign. stericycle will assist you in locating dealerships or service centers and will provide assistance with scheduli

Problem: Damon is recalling 2,415 motorhomes equipped with axles that include bosch zops or zoht pin slide hydraulic disc brakes. when combined with occasional or seasonal vehicle operation may experience calipers sticking in the applied position. this can result in abnormal heat generation at the wheel end causing brake drag.

Risk: The driver would normally detect the brake drag but if undetected the temperature increase at the wheel end can eventually lead to soft pedal conditions due to brake fluid boil, and possible extended stopping distance increasing the risk of a crash.

Fix: Dealers will inspect and replace the necessary components free of charge. workhorse is handling the remedy and owner notification for this campaign please see 09v-110. owners may contact workhorse at 1-877-246-7731.