Fleetwood Rio Grande problems & recalls

Problem: Insufficient grease was applied to the trailer axle hub inner bearing causing the bearing to overheat during tow operations. the overheated bearing can seize to the axle spindle causing the trailer axle hub to break at the rear seal flange.

Risk: A broken trailer axle causes loss of trailer control and results in a accident.

Fix: Dealers will remove the trailer's axle hubs and inspect the inner bearings for sufficient grease and also inspect all related axle parts such as bearing races and axle spindle for wear. the bearings will be repacked or replaced if necessary and new grease seals will be installed. note: if the vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided

Problem: Improper installation of electrical wiring to the exterior lights (brake lights, running lights, and turn signals) of the trailer allows the steel lifting cables used to raise and lower the folding top to rub against the electrical wiring whenever the top is lowered or raised.

Risk: Continued rubbing from the steel lifting cables causesloss of insulation around the wires, resulting in electrical short circuitsand a possible fire hazard.

Fix: A plastic wiring protector will be installed around the lifting cable.